Pressure Relief Valve
A pressure relief valve is a device mounted on a hot water heater or boiler and is designed to release any high steam pressure in the tank and thus prevent tank explosions. These specialty valves are used for systems that contain gases and liquids in a variety of pneumatic, hydraulic, and cryogenic applications to provide protection from over-pressure in steam, gas, air and liquid lines. The working involves letting off the steam when safe pressure level is exceeded and then closing of the valve after the pressure level drops to the preset level; Back pressure regulating valve helps to maintain upstream pressure at the desired level by allowing excess upstream pressure to flow downstream. These self-operating valves are installed to prevent over pressurization of the system.
- Petrochemicals
- Pneumatic equipments
- Hydrocarbons
- Chemical Processing
This is default description text on Padangan Themes, of course you can change this text via you profile administration.
August 21st, 2007 at 11:33 pm
Valves :
Cast Valves
Cast Valves
Carbon Steel, Stainless steel Malleable iron, Cast iron, Bronze From Gate, Globe, Check, Strainer and Angle valve
Butterfly Valves
Butterfly Valves
From Standard rubber lined to
High performance
Ecectric Plug
Eccentric Plug
Eccentric plug, use in
systems where slurries,
grit or solids are present
Swing Flex
Swing-Flex
Ideal for slurry and sludge
Sewage Air Valves
Sewage Air Valves
Maintains efficiency and
provides protection to waste
water systems by venting,
exhuasting, and admitting air
during system operating condition
Cryogenic Valves
Cryogenic Valves
Certified to BD6364
Forged Valves
Forged Valves
Forged Carbon, Stainless, Alloy to
API 602. From Gate, Globe, Check,
and Ball valves.
Tilted Disc Energy
Tilted Disc Energy
Efficient pluss…
-Non-slam closure
-Wear Resistance
-Drop Tight Seating
Rotating disc-for High Abrasion
Rotating disc-for High Abrasion
Unique Self Lapping metal-to- metal seat design provides repeated tight shut off in severe sevice, while sealing improves with use
Plug Valves-Sleeve and Lined
Plug Valves-Sleeve
and Lined
Valves can be
automated with pneumatic actuators or electric actuators
Knife Gate
Knife Gate
Manual, Pneumatic
operated or Electric
Steam Specialty :
Safety Valves
Safety Valves
In Low Lift or Full Bore for various fluids. Twin safety valve for steam boiller is also available.
Pressure Reducing Valves
Pressure Reducing Valves
Managing steam, air and liquid
systems safely and efficiently by
maintaining constant pressure or temperature for process control.
Temperature Regulators
Temperature Regulators
Direct acting temperature regulators
require no external source for operation. Simple and compact, the units are suitable for a wide variety of heating/cooling applications.
Trap Valves Station
Trap Valve Station
A steam trap and valves in one Space-saving package that reduce cost for energy, installation and maintianance.
Steam Traps
Steam Traps
From inverted bucket, float and termostatic adn controlled disc traps in cast iron, steel and stainless.
Air Vent Valves
Air Vent Valves
An indispensable part or air-cond.
Piping systems. Operate through a wide
working pressure range ot discharge air
automatically from the system.
Condensate Handling Systems
Condensate Handling Systems
The pumping traps are and ideal non-electric solution for returning condensate in special application such as pumping from a vacuum, entering a pressurized return line or elevating condensate.
Ball Valves :
Trunnion mounted
Forged steel ball valves up to 60″
Design to API 6D-6FA, API 607, Bs6755, Bs5146.
Pressure rating from ANSI 150# to 2500# and API2000 to 15,000. Design in side entry-bolted body and top entry, Sub sea ball valves and cryogenic ball valves.
Material in carbon steel, alloy steel, staianless steel, duplex steel and others.
Actuated valves with Pneumatic, electric or gas over hydraulic actuators supplied in accordance to specifications.
3 pc construction
3pc construction
Forged steel from 1/4″ to 6″ in Trunnion and Floating ball.
Design to API 6D-ASME/ANSI B16.34 and Bs5351 for the Power, Petroleum, Chemicals, Petrochemicals and Allied industries. Pressure rating from 150# to 2500#
Diverter
Dirverter
2 pc
2pc
3 ways
3way
Cryogenic
Cryogenic
Steam jacked
Steam jacketed
Locking device
Locking device
Floating Ball range
Cast carbon steel, stainless and alloys. Design in accordance to Bs5351 and API607 rev3.
Pressure rating in ANSI 150/300/600
Metal seated ball valves for high temp& abrasive services. Temp up to 800c.
Corrosion Resistant :
Thermoplastic valves
A wide range of valves
in UPVC, CPVC, PP
and PVDF, From
standard valve to Control valves
Thermoplastic valve
Glass lined
High acid resistant
glass-lined steel
piping, valves,
fittings and
vessel to
DIN2873 /
DIN2876
Plastics Lined
By combining steel pipe
with plastics, offers both the
strength of steel and the
corrosion resisted of plastics.
PP, PVDF, PTFE and PFA
Joint Reduction
Joint Reduction
Technology
Maximum safety
Maintenance free
Minimize cost
Pump Protection and Filtration
Strainer
Y,T, Basket or Duplex type in various materials, Fabricated strainers to customers’ specs.
Y-Strainer
Automatic Self-Cleaning Strainer
Automatic
Self-Cleaning strainer
Do not need to clean the basket manually.
-Reduce maitainance
-Increase safety both equipments and maintainance personnel
-Plant run more efficiently without interuption
Check Valve for Reciprocating Coppressor
Check Valve for
Reciprocating Compressor
Specially designed for use as discharge side of reciprocating air or gas compressor.
–Pulse damping chamber
-Spring assisted design
-Positive shut-off
In-line Check valves
In-line
Check Valves
With spring loaded, silently prevent water hammer.
Specialty System
Y -strainers
Pressure : 150# to 1500# Size : 1/2″ to 24″
Basket Strainer
Basket strainer
Size 1/2″ to 24″
Tilted Disc Energy Efficient pluss
Tilted Disc Energy
Efficient plus…
-Non-slam closure
-Wear Resistance
-Drop Tight Seating
Specialty System
Package includes:
-Gas compressor piping
-Pulsation Dampening Vessel
-Veritcal Vane Seperators
-Air Reciever
-Surge Vessels
…made to customers’ specs.
Ozone Generator
Ozone Generator
Ball-Plex
Ball-Plex uses ball
instead of plug
Easy maintenance.
Automatic with Accessories
Dual Plate Check Valves
Dual Plate
Check Valves
In Cast iron, ductile,
carbon, stainless or alloys.
Suction Diffuser
Suction Diffuser
Protection to pump especially when space is limited.
Filters
Oil / Gas / Fuel Filters
Compressed Air, Natural Gas, Ammonia, Argon, Helium, Hydrogen, Menthane, Nitrogen and others.
Three Stage Fuel Filters : Cleans natural gas to one micron!!
Instrumentation valves :
Instumentation Valves
Needle and gauge valves, ball valves, bellows sealed valves and manifolds, Double block & bleed valves for the oil, gas and petrochemicals.
Sub-sea application valves: needle and ball valves.
Gauges
From temperature measurement to pressure. A complete range from Bimetallic thermometers, Gas Pressured thermometers, RTDs and Tcs. Pressure gauges in bourdon tube, diaphragm and capsule type.
RUEGER S90
Provides you with remote and local reading with one instrument.
Controls
Automatic valve package
Complete with:
Switchboxes, Solennoid Valves, Manual override gearboxes, Positioners and accessories.